Q-Logic 6140 manual FC Port Advanced Configuration Tabbed

A

7 – SANsurfer iSCSI/FC Router Manager System Tree Window

„Actual Data Rate – The data rate at which the port operates when on-line. This value can be one of the following:

„1 Gbps - one gigabits per second

„2 Gbps - two gigabits per second

„Save – If you change the Port Status, click this button to save your changes. A warning message opens, asking you to verify that you want to change this status. Click Yes to proceed or click No to cancel changing the status.

Advanced Configuration

The FC port display provides an Advanced Configuration tabbed page with editable configuration parameters for the selected port, as shown in Figure 7-19.

Figure 7-19 FC Port Advanced Configuration Tabbed Page

To update the advanced port configuration:

1.Select the desired value from the drop-down list box next to the parameter you want to change:

„Connection Options – Select the connection options from the drop-down list box: 0 - Loop Only, 1 - Point to Point Only, or 2 - Loop Preferred, Otherwise Point to Point.

„Data Rate – Select the data rate from the drop-down list box: Auto, 1Gbps, or 2Gbps.

FI0154601-00 C 7-21