Q-Logic 6140 Guest Account, Working with SAN Router Configurations, Modifying a Configuration

A – Command Reference Guest Account

S

Guest Account

Routers come from the factory with the following account already defined:

Account name: guest

Password: password

This guest account provides access to the router and its configuration. After planning your router management needs, consider changing the password for this account.

The guest account is automatically closed after 15 minutes of inactivity.

See the password command (page A-20) for information about changing passwords.

Working with SAN Router Configurations

Successfully managing routers with the command line interface depends on the effectively using router configurations. Key router management tasks include modifying configurations, backing up configurations, and restoring configurations.

Modifying a Configuration

The router has three major areas of configuration:

„Management port configuration, which uses the following commands:

„set mgmt (see page A-33)

„show mgmt (see page A-52)

„ISCSI port configuration, which uses the following commands:

„set iscsi (see page A-30)

„show iscsi (see page A-45)

„LUN Mapping, which uses the following command:

„lunmask add (see page A-18)

Saving and Restoring Router Configurations

Saving and restoring a configuration helps protect your work. You can also use a saved configuration as a template for configuring other routers.

A-2 FI0154601-00 C