Q-Logic 6140 manual Save Command, Traces

A

A – Command Reference Commands

Save Command

	Saves logs and traces.
Authority	Admin session
Syntax	save
	logs
	traces
Keywords	logs
	The save logs command creates a tar file that contains the router’s log data,
	storing the file in the router’s /var/ftp directory. After the command
	completes, you must ftp the log’s tar file from the router.
	traces
	The save traces command creates a tar file that contains the router’s dump
	data, storing the tar file in the router’s /var/ftp directory. After the command
	completes, you must ftp the trace’s tar file from the router. After executing this
	command, the system notifies you if the router does not have any dump data.
	Each time it generates dump data, the system adds an event log entry.
Examples	The following example shows the save logs command:
	QRouter (admin) #> save logs

Save Event Logs completed. Package is Router_Evl.tar.gz

Please use FTP to extract the file out from the System.

The following are two example of the save traces command:

QRouter (admin) #> save traces

Save ASIC Traces completed. Package is Router_Asic_Trace.tar.gz Please use FTP to extract the file out from the System.

QRouter (admin) #> save traces

No ASIC trace files exist to save. Command aborted.

FI0154601-00 C A-25