Q-Logic 6140 manual GUI-Normal Session-Uni-directional Chap

A

B – Configuring CHAP Configuring CHAP Using the GUI

15.Select Chap Login Information.

16.Type the secret (secret_initiator) that you created in Step 9 into Target Secret.

17.Select Mutual Authentication.

18.Click OK.

19.Click OK. The initiator completes normal login.

GUI—Normal Session—Uni-directional CHAP

To program single-direction CHAP during a normal session:

1.Do not enable CHAP on the iSCSI presented target.

2.Check to see if the initiator exists on the discovered iSCSI initiators list:

„If the initiator is not part of the discovered iSCSI initiators list, then open the Wizard menu and select Add Initiator Wizard.

„If the initiator is part of the discovered list, then skip to Step 6.

3.Fill in the IQN name string.

4.Select Enable Chap.

5.Create a CHAP secret (for example, secret_initiator).

6.Go to the MS Initiator and perform the following steps:

a.Click Targets.

b.Select the target you want to login to.

c.Click Log On.

d.Click Advanced.

e.Click Chap Login Information.

f.Type the secret (secret_initiator) you created in Step 5 into Target Secret,

g.Click OK.

7.Click OK. The initiator completes normal login.

FI0154601-00 C B-7