Q-Logic 6140 manual Wizards Menu, 7shows the Wizards drop-down menu

7 – SANsurfer iSCSI/FC Router Manager Menu Bar

S

The Settings menu provides the following option:

„Broadcast – Opens the Broadcast Settings window, which allows you to configure the broadcast options. The workstation sends Broadcast messages to locate routers within the same IP subnet as the workstation running the SANsurfer Router Manager application. Figure 7-6shows the Broadcast Settings dialog box.

Figure 7-6 Broadcast Settings Menu

The following paragraphs describe its options.

„Enable Broadcast – Enables broadcast messages sent to locate routers in the IP subnet.

„Enable Auto Connect – Enables the SANsurfer Router Manager to automatically connect with routers discovered by the broadcast.

„Broadcast Interval – Sets the time interval at which the SANsurfer Router Manager sends broadcast messages to locate routers within the same IP subnet as the workstation.

Wizards Menu

Figure 7-7shows the Wizards drop-down menu.

Figure 7-7 Wizards Menu

The Wizards menu provides the following options:

„Configuration Wizard – Launches the iSCSI Port Configuration wizard, which allows you to configure the IP address and other parameters for an iSCSI port (see page 7-45).

7-4 FI0154601-00 C