Q-Logic 6140 Ping Command, Syntax ping, Examples The following example shows the ping command

A

A – Command Reference Commands

Ping Command

Verifies the connectivity of each Ethernet port, management, GE1, and GE2. Authority Admin session

Syntax ping

Examples The following example shows the ping command:

QRouter (admin) #> ping

A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

IP Address (IPv4 or IPv6)		[0.0.0.0]
fe80::217:a4ff:fe99:c279
Iteration Count (0=Continuously)		[0	] 10
Outbound Port (0=Mgmt,	1=GE1, 2=GE2, ...) [Mgmt		]
Size Of Packet (Min=1,	Max=65486 Bytes)	[56	]

Pinging fe80::217:a4ff:fe99:c279 with 56 bytes of data:

Request timed out.

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.4ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.3ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.3ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.2ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.3ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.3ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.7ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.2ms

Reply from fe80::217:a4ff:fe99:c279: bytes=64 time=0.2ms

Ping Statistics for fe80::217:a4ff:fe99:c279:

Packets: Sent = 10, Received = 9, Lost = 1

Approximate round trip times in milli-seconds:

Minimum = 0.2ms, Maximum = 0.7ms, Average = 0.3ms

FI0154601-00 C A-21