Q-Logic 6140 manual Set FC Command, Set fc portnum, Portnum

A – Command Reference Commands

S

Set FC Command

	Configures a Fibre Channel port.
Authority	Admin session
Syntax	set fc [port_num]
Keywords	[port_num]
	The number of the FC port to be configured.
Examples	The following example shows the set fc command:
	QRouter (admin) #> set fc
	A list of attributes with formatting and current values will follow.
	Enter a new value or simply press the ENTER key to accept the current
	value. If you wish to terminate this process before reaching the end
	of the list press 'q' or 'Q' and the ENTER key to do so.
	WARNING:
	The following command might cause a loss of connections to both ports.

Configuring FC Port: 1
-------------------------
Link Rate (0=Auto, 1=1Gb, 2=2Gb)	[Auto	]
Frame Size (0=512B, 1=1024B, 2=2048B)	[2048	]
Execution Throttle (Min=16, Max=256)	[64	]
Programmed Connection Option:
(0=Loop Only, 1=P2P Only, 2=Loop Pref)	[Loop Pref ]

All attribute values for Port 1 that have been changed will now be saved.

Configuring FC Port: 2
-------------------------
Link Rate (0=Auto, 1=1Gb, 2=2Gb)	[Auto	]
Frame Size (0=512B, 1=1024B, 2=2048B)	[2048	]
Execution Throttle (Min=16, Max=256)	[64	]
Programmed Connection Option:
(0=Loop Only, 1=P2P Only, 2=Loop Pref)	[Loop Pref ]

A-28 FI0154601-00 C