Q-Logic 6140 manual Traceroute Command, Syntax traceroute

A – Command Reference Commands

S

Traceroute Command

Prints the route a network packet takes to the reach the destination specified by the user.

Authority Admin session

Syntax traceroute

Examples Traceroute command example:

A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so.

IP Address (IPv4 or IPv6)	[0.0.0.0] 172.17.136.18
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt		]

Tracing route to 172.17.136.18 over a maximum of 30 hops:

1 172.17.136.18 2.3ms 0.2ms 0.2ms

Traceroute completed in 1 hops.

A-68 FI0154601-00 C