Q-Logic 6140 manual Recovering a Router

A

5 – Diagnostics and Troubleshooting Recovering a Router

Recovering a Router

You may have to recover a router for one of the following reasons:

„The password was changed and has been forgotten.

„The router’s management IP address is unknown.

To recover the router’s password, reset the password to the default by using the maintenance button (see page 2-3).

You can recover the router’s IP address using either of the following methods:

„Connect to the serial console port (see page 2-8), then use the CLI set mgmt command reconfigure the management port (see page A-33).

„Use the maintenance button to reset the management port’s IP to the factory default of 10.0.0.1 (see page 2-3).

FI0154601-00 C 5-5