Q-Logic 6140 Target Command, Not supported, Remove a target from the router’s target database

A

A – Command Reference Commands

Target Command

Removes targets from the router’s database. This command is typically used to remove targets from the database that are no longer connected to the router. The target add command is not currently supported.

Authority	Admin session
Syntax	target
	add
	rm
Keywords	add
	Not supported
	rm
	Remove a target from the router’s target database.
Examples	The following example shows the target add command:
	QRouter	(admin) #> target add
	Command 'target add' is currently not supported.
	The following example shows the target rm (remove) command:
	QRouter	(admin) #> target rm

Index State (WWNN,WWPN/iSCSI Name)

---------- ----------------------

0Offline 20:00:00:14:c3:3d:d2:bf,22:00:00:14:c3:3d:d2:bf

1Online 20:00:00:14:c3:44:9b:86,22:00:00:14:c3:44:9b:86

2Online 20:00:00:14:c3:44:9b:9d,22:00:00:14:c3:44:9b:9d

3Online 20:00:00:14:c3:44:9a:fa,22:00:00:14:c3:44:9a:fa

Please select an OFFLINE Target from the list above ('q' to quit): 0

All attribute values for that have been changed will now be saved.

FI0154601-00 C A-65