Q-Logic 6140 manual Install SANsurfer iSCSI/FC Router Manager, Windows Installation

A

4 – Installation Installing the SANbox 6140 Router

„For Linux:

a.Set up minicom to use the serial port. Create or modify the /etc/minirs.dfl file with the following content:

pr portdev/ttyS0 pu minit

pu mreset pu mhangup

pr portdev/ttyS0 specifies port 0 on the workstation. Choose the pr setting to match the workstation port to which you connected the router.

b.Verify that all users have permission to run minicom. Review the /etc/minicom.users file and confirm that the line ALL exists or that there are specific user entries.

„For Solaris – Modify the /etc/remote file to include the following lines. /dev/term/a refers to serial port a. Choose the “dv” setting to match the workstation port to which you connected the router. SANbox:

\:dv=/dev/term/a:br#115200:el=^C^S^Q^U^D:ie=%$:oe=^ D:

3.Connect the router to the power (see page 4-9).

Install SANsurfer iSCSI/FC Router Manager

You can manage the router using the SANsurfer iSCSI/FC Router Manager application. The following sections describe how to install the application on either a Windows or Linux workstation. See Section 7 for information on how to use SANsurfer iSCSI/FC Router Manager.

Windows Installation

Perform the following steps to install the SANsurfer iSCSI/FC Router Manager application from the QLogic website to a PC workstation:

1.Close all programs currently running.

2.Go to the QLogic download site: http://support.qlogic.com/support/drivers_software.aspx

3.Select the Intelligent Storage Routers icon.

4.Select SANbox 6140 in the product selection window and click Go.

5.Under the product name column, select the link to the SANsurfer Router Manager for your operating system.

6.Read the license agreement and click Agree.

7.Follow the system prompts to uncompress and install the application.

FI0154601-00 C 4-7