User Manual version 2503
uQUICK POWER ON SELF TEST
This category speeds up Power on Self Test (POST) after you power up the computer. If it is set to Enable, BIOS will shorten or skip some check items during POST.
Enabled: Enable quick POST
Disabled: Normal POST
uFIRST/SECOND/THIRD/OTHER BOOT DEVICE
The BIOS attempts to load the operating system from the devices in the sequence selected in these items.
The Choice: Floppy, LS/ZIP, HDD, SCSI, CDROM & Disabled.
The choice: Enabled & Disabled.
uSWAP FLOPPY DRIVE
If the system has two floppy drives, you can swap the logical drive name assignments.
The choice: Enabled & Disabled.
uBOOT UP FLOPPY SEEK
This category seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled & Disabled.
uBOOT UP NUMLOCK STATUS
This category selects power on state for NumLock.
The choice: Enabled & Disabled.
uGATE A20 OPTION
Select this category if chipset or keyboard controller should control GateA20.
Normal A pin in the keyboard controller controls GateA20 Fast Lets chipset control GateA20
uTYPEMATIC RATE SETTING
Keystrokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be selected.
The choice: Enabled & Disabled.
LIBRA 120 III (PC620 Intel 815E) |
PDF created with pdfFactory trial version www.pdffactory.com
