March Products 120 III (PC620) user manual Kiosk Enclosure W Media Reader Bezel Assembly

User Manual version 2503

7.Insert the power cord (H) from the opening at the left bottom side of the cabinet. Connect the power cord to the power module and integrate the power module (I) to the left bottom side of the cabinet with three TMS M3*6 screws.

8.Fix the HDD module (J) to the right bottom side of the cabinet with three TMS M3*6 screws. Connect the big 4-pin power cable from the power module to the HDD.

9.Retain the media reader/CD-ROM module (K) to the bottom of the cabinet with four TMS M3*4 screws.

10.Attach the plastic media reader bezel (M) to the Kiosk cabinet front side and clip it into place.

(I)	(J)
(B)
		(E)
		(F)
		(H)
(C)
(K)
	(D)	(A)
(M)
		(G)
FIGURE 3-14: KIOSK ENCLOSURE W MEDIA READER BEZEL ASSEMBLY

3-44 LIBRA 120 III (PC620 Intel 815E)

PDF created with pdfFactory trial version www.pdffactory.com