User Manual version 2503
3.1.3.6. CD-ROM Module Assembly
The LIBRA Kiosk provides enough space to accommodate a slim CD-ROM or an equivalent device.
If a thermal receipt printer is integrated with the Kiosk, due to space limitation, the slim CD-ROM device is to be installed in the panel PC chassis as illustrated in Fig. 3-8 and accessed from the right side of the Kiosk cabinet. If no receipt printer is integrated with the Kiosk, the slim CD-ROM device can be integrated with the media card reader module and accessed from the front side.
Refer to Fig. 3-7. The following steps show the ways to install a CD-ROM module before it is integrated to the panel PC.
1.Attach the CD-ROM board to the slim CD-ROM drive (A) and fix them together with 2 screws.
2.There is a small metal bracket (B) used to firmly fix the CD-ROM drive to the CD-ROM bracket. Retain the small bracket to the CD-ROM drive first with two IMS M2*2.25 screws. This small bracket is to prevent the CD-ROM drive from moving when installed to the CD-ROM bracket.
3.Insert the CD-ROM module with a small bracket on to the CD-ROM bracket (C) and fix them together with two IMS M2*2.25 screws and two PMS M3*5 screws.
(A) |
(B) |
(D) |
(C) |
FIGURE 3-7: SLIM CD-ROM MODULE ASSEMBLY |
LIBRA 120 III (PC620 Intel 815E) | 3-31 |
PDF created with pdfFactory trial version www.pdffactory.com
