User Manual version 2503

3.2.4.Media Reader/CD-ROM Module Assembly

Refer to Fig. 3-7. The following steps show the ways to install a media reader/CD-ROM module before it is integrated to the panel PC.

1.Insert the media reader (B) to the media reader/CD-ROM bracket and fix them together with four TMS 3*6 screws.

2.Attach the CD-ROM board to the slim CD-ROM drive (C) and fix them together with 2 screws.

4.There is a small metal bracket (D) used to firmly fix the CD-ROM drive to the bracket. Retain the small bracket to the CD-ROM drive first with two IMS M2*2.25 screws.

This small bracket is to prevent the CD-ROM drive from moving when installed to the device bracket.

5.Insert the CD-ROM module with a small bracket on to the media reader/CD-ROM bracket (A) and fix them together with two IMS M2*2.25 screws and two PMS M3*5 screws.

FIGURE 3-13.MEDIA READER/CD-ROM MODULE ASSEMBLY

LIBRA 120 III (PC620 Intel 815E)

3-39

PDF created with pdfFactory trial version www.pdffactory.com

Page 49
Image 49
March Products 120 III (PC620) user manual Media Reader/CD-ROM Module Assembly, MEDIA Reader /CD-ROM Module Assembly