Important Safety Precautions
Before getting started, read these instructions and save them for later reference.
1.Turn off the computer before cleaning. Clean with a damp or dry cloth only. Do not spray any liquid cleaner on screen directly.
2.The power outlet socket used to plug in the computer power cord must be located near the system and easily accessible. Do not use outlets on the same circuit of the systems that regularly switched on and off.
3.Make sure the voltage of the power source is correct before connecting the computer to the power outlet.
4.If the computer is sharing an extension cord with other devices, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating.
5.Do not expose the power cord, extension cord and power outlet to moisture.
6.Install the computer on a reliable surface to prevent damage caused by dropping.
7.This computer is not equipped with an operating system. An operating system must be loaded first before installing any software into the computer.
8.Disconnect the power cord from the computer before any installation. Make sure both the computer and the external devices are turned off. The sudden surge of power may ruin any sensitive components. Also make sure the computer is properly grounded.
9.During installation of any internal components, be sure to ground yourself to keep from any static charge. Most electronic components are sensitive to the static electric charge. Use a grounding wrist strap and place all electronic components in any
PDF created with pdfFactory trial version www.pdffactory.com
