User Manual version 2503
4.1.5.1.ATXP1: ATX Power connector
ATXP1 is a standard ATX power connector. This connector is provided to connect to an ATX power supply. The plug of the power supply will only insert in one orientation due to the different hole size. Find the proper orientation and push down the power connector firmly to make sure the pins are aligned. Its pin assignments are listed below:
Pin # | Signal | Pin # | Signal |
1 | 3.3V | 11 | 3.3V |
2 | 3.3V | 12 | |
3 | GND | 13 | GND |
4 | +5V | 14 | PSON# |
5 | GND | 15 | GND |
6 | +5V | 16 | GND |
7 | GND | 17 | GND |
8 | PWROK | 18 | |
9 | SB5V | 19 | +5V |
10 | +12V | 20 | +5V |
4.1.5.2.CN1: Touchscreen Power Connector
Pin # Signal
1 GND
2 VCC
4.1.5.3.PWR1:
Pin # Signal 1 +12V
GND GND
2 VCC
LIBRA 120 III (PC620 Intel 815E) |
PDF created with pdfFactory trial version www.pdffactory.com
