BenQ M555C Signal Can, Location Properly, Building, You Are Using Your Avoid, Later Rush hour

WHAT TO DO IF...

If you encounter any problems using your mobile phone, please refer to the following table. If the problem persists, please contact your dealer.

Problem		Possible cause							Solution
Poor	signal	• You	are	using		your		Move to a location where
reception		mobile		phone		in	a	signal	can	be	received
		location		(e.g.	in		the	properly.
		basement		or	building)
		where signal is weak.
		• You	are	using		your		Avoid	using	your	mobile
		mobile phone in a call-						phone in such time, or try
		crammed		time	(e.g. the			later.
		rush hour).
		• You are too far from the						You can ask your network
		base	station		of	your		operator for a service range
		network operator.						map.
Echo or noise		• The	network			trunk		Hang up the phone and
		quality of your network						dial again. You can be
		operator.						switched to a better-quality
								network trunk or line.
		• Poor local telephone line
		quality.
The	standby	• The	standby			time		If you are in a location
time becomes		depends		on the		system		where	the signal		is weak,
		settings of your network						turn your phone off for the
short
		operator.						time being.
		• The battery needs to be						Use a new battery.
		replaced.
		• If the phone cannot get						Change your location or
		connected to a network,						turn	off	your	phone
		it will continue searching						temporarily.
		for the signal from the
		base	station,			which
		consumes				battery
		capacity.

136What to do if...