BenQ M555C user manual Proxy, Circuit Prompt, Circuit Linger, Scroll Mode, Scroll Speed

2 Proxy

Each proxy number represents the setting data of a WAP server (or UPLINK). There are three different WAP servers available in your phone. Here you can select a proxy number that represents the server you want to activate as the default server. Your phone connects to the default server during an Internet session.

You can also go the menu: Settings --> Wap settings to select the server you want to activate. See page 120.

WAP Proxy 1 => UPLINK1 WAP Proxy 2 => UPLINK2 WAP Proxy 3 => UPLINK3

3 Circuit Prompt

The Circuit Prompt is a message displayed before each circuit data call is made. It reads “Circuit is down. Start data call?”. You may enable and disable it by selecting ON or OFF.

4 Circuit Linger

The Circuit Linger is length of time that the phone waits before terminating a circuit data call. You may set it to any length of time between 30 and 9999 seconds.

5 Scroll Mode

You can select the scroll mode in Block or Smooth. In the Block Scroll mode, as many of the words that fit on a line are displayed for a few seconds then the next line is displayed, then the next and so on. In the Smooth Scroll mode, the content scrolls smoothly on the display.

6 Scroll Speed

Adjusts the scroll speed to Fast, Medium, or Slow.

54Mobile Internet