
User Manual version 2503
To obtain the Ethernet card MAC, under Windows 9x, just enter START\RUN to open the winipcfg.exe, then the following screen will pop up. If the OS is Windows NT 4.0 or 2000 or XP, then you need to enter DOS mode to run ipconfig.exe to obtain the MAC.
The adapter address is the LAN card’s MAC address.
4.After obtaining all the above information, the remote computer can be powered on now.
Now you can use Desktop On Call or other remote software to control the remote computer.
| LIBRA 120 III (PC620 Intel 815E) |
PDF created with pdfFactory trial version www.pdffactory.com