March Products 120 III (PC620) Init Display First, Flash ROM Write, Onboard LAN Function

User Manual version 2503

uINIT DISPLAY FIRST

This item allows you to decide to active which bus first (PCI slot or onboard/AGP).

The choice: PCI Slot or Onboard/AGP

uFLASH ROM WRITE

This item supports the BIOS ROM write Enable/Boot block lock/Disable.

uONBOARD LAN FUNCTION

The item can disable the onboard built-in LAN function.

uIDE HDD BLOCK MODE:

Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/write per sector the drive can support.

The choice: Enabled or Disabled.

uPOWER ON FUNCTION

uKB POWER ON PASSWORD

This category can be used to prompt a password when the system power is resumed by keyboard action.

uHOT KEY POWER ON

uONBOARD FDC CONTROLLER

Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you install and-in FDC or the system has no floppy drive, select Disabled in this field.

uONBOARD SERIAL PORT1/PORT2/PORT3/PORT4

This category is to select an address and corresponding interrupt for the first and second serial ports.

The choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ10, 2E8/IRQ11, Disabled or Auto.

Serial Port 2 is RS232/RS422/RS485 selected via BIOS setting.

LIBRA 120 III (PC620 Intel 815E) 5-91

PDF created with pdfFactory trial version www.pdffactory.com