User Manual version 2503

8.Insert the power cord (H) from the opening at the left bottom side of the cabinet. Connect the power cord to the power module and integrate the power module (I) to the left bottom side of the cabinet with three TMS M3*6 screws.

9.Fix the HDD module (J) to the right bottom side of the cabinet with three TMS M3*6 screws. Connect the big

4-pin power cable from the power module to the HDD.

10.Make sure all the cables from the printer power module (K) to the printer module (L) are already properly connected.

11.Integrate the printer power module (K) to the left upper side of the cabinet with three M3 nuts. Retain the printer module (L) to the bottom of the cabinet with four TMS M3*4 screws.

12.Plug the 4-pin male end of the Y-shape extension cable from the printer power board to the big 4-pin female end of the power supply.

13.Attach the plastic printer bezel (M) to the Kiosk cabinet front side and clip it into place.

LIBRA 120 III (PC620 Intel 815E)

3-41

PDF created with pdfFactory trial version www.pdffactory.com

Page 51
Image 51
March Products 120 III (PC620) user manual Libra 120 III PC620 Intel 815E