9.4Choice 4: Return to Default Configuration
Enables restoration of the default configuration of all the card’s parameters
MGE UPS SYSTEMS
NETWORK MANAGEMENT CARD
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
Wait during configuration returns to default ...
Wait for the confirmation message.
Configuration has been set to default one.
You must Reset the card.
The card must be restarted in order for the new parameters to be taken into account.
Network Management Card & Modbus/Jbus | 34022321XT indice :AE | Page 64/98 |
Network Management Teleservice Card |
|
|
APC by Schneider Electric
www.apc.com
