Load short circuit | Load OK |
Load not powered | Load powered |
Protection Lost | Protection OK |
Emergency button ON | Emergency button OFF |
Fan fault | Fan OK |
Redundancy Lost | Redundancy OK |
Low battery | Battery OK |
UPS communication failed | UPS communication restored |
UPS data base not available | UPS data base OK |
UPS on battery | UPS on normal AC |
UPS internal fault | UPS OK |
UPS overload | UPS returns to normal load |
UPS overtemperature | UPS temperature OK |
UPS running in Power Saving Mode | End of Power Saving Mode |
Imminent UPS shutoff | UPS OK |
< Sensor Name> : Temperature is above high threshold <xx> (°C) | <Sensor Name> : Temperature is in normal range |
or (°F) |
|
< Sensor Name> : Humidity is above high threshold <xx> (%) | <Sensor Name> : Temperature is in normal range |
< Sensor Name> : Temperature is below low threshold <xx> °C or | <Sensor Name> : Temperature is in normal range |
(°F) |
|
< Sensor Name> : Humidity is below high threshold <xx> (%) | <Sensor Name> : Temperature is in normal range |
<Sensor name>: <Input #1 label> <when closed label> |
|
<Sensor name>: <Input #1 label> <when open label> |
|
<Sensor name>: <Input #2 label> <when closed label> |
|
<Sensor name>: <Input #2 label> <when open label>> |
|
Network Management Card & Modbus/Jbus | 34022321XT indice :AE | Page 91/98 |
Network Management Teleservice Card |
|
|
APC by Schneider Electric
www.apc.com
