5 Configuration
5.1Configure IP parameters
Once the card has started:
Connect one end of the cable (3402226700) to the Service port.
If the environment sensor was previously connected, the card must be restarted in order to access the configuration menu. Connect the other end of the cable to the COM port (IOIOI) of a PC.
Launch a HyperTerminal™ type emulator with the foll owing configuration:
NMTC | INMC |
Speed: 38400 | Speed: 9600 |
Data bits: 8 | Data bits: 8 toto |
Parity: none | Parity: none |
Stop bits: 1 | Stop bits: 1 |
Flow control: none | Flow control: none |
"Locally reproduce the characters entered" option: deactivated.
Enter MGEUPS or mgeups. The main menu is displayed:
Network Management Card & Modbus/Jbus | 34022321XT indice :AE | Page 18/98 |
Network Management Teleservice Card |
|
|
APC by Schneider Electric
www.apc.com
