11 Appendices
11.1 Tables of alarms and events
11.1.1 Table of alarms and UPS events
List of time dated alarms
Alarm on
No Battery
Battery temperature fault
Battery charger fault
Battery fault
End of Warranty
Contact MGE http://www.mgeups.com/lcm
End of battery life
Contacter MGE http://www.mgeups.com/lcm
End of life of the wearing parts
Contacter MGE http://www.mgeups.com/lcm
Rectifier fault
Chopper fault
Normal AC frequency out of tolerance
Normal AC fuses blown
Normal AC module fault
Normal AC voltage out of tolerance
Normal AC NOK
Site wiring fault
Bypass AC frequency out of tolerance
Bypass AC phase out of tolerance
Bypass AC voltage out of tolerance
Automatic Bypass fault
Automatic Bypass overload
Automatic Bypass overtemperature
Automatic Bypass thermal overload
Automatic Bypass switch (Q4S) open
Normal AC switch (Q1) open
Battery switch (QF1) open
Manual Bypass switch (Q3BP) closed
UPS on manual bypass
Output switch (Q5N) open
Single wave load fault
Inverter limitation
Inverter fuses blown
Inverter fault
Inverter overload
Inverter thermal overload
Load not protected - On Automatic Bypass
Network Management Card & Modbus/Jbus
Network Management Teleservice Card
APC by Schneider Electric
www.apc.com
Alarm off
Battery present
Battery temperature OK
Battery charger OK
Battery OK
LCM message OK
LCM message OK
LCM message OK
Rectifier OK
Chopper OK
Normal AC frequency OK
Normal AC fuses OK
Normal AC module OK
Normal AC voltage OK
Normal AC OK
Site wiring OK
Bypass AC frequency OK
Bypass AC phase OK
Bypass AC voltage OK
Automatic Bypass OK
Automatic Bypass load OK
Automatic Bypass temperature OK
Automatic Bypass load OK
Automatic Bypass switch (Q4S) closed
Normal AC switch (Q1) closed
Battery switch (QF1) closed
Manual Bypass switch (Q3BP) open
Output switch (Q5N) closed
Load OK
Inverter end of limitation
Input fuses OK
Inverter OK
Inverter load OK
Inverter load OK
Load protected - Return from Bypass
34022321XT indice :AE
Page 90/98
