Schneider Electric 66124 Installation in the UPS, Sensor installation option, Led, Act, Ups

Ethernet port

LED	Colour	Activity		Description
ACT	Green	◗	Off	◗	Card not connected to the network.
		◗	On	◗	Card	connected to		the	network	but
					without activity
		◗	Flashing	◗	Port	is	active	in	receiving	/
					transmission
100M	Orange	◗	Off	◗	Port operating at 10Mbits/s.
		◗	On	◗	Port operating at 100Mbits/s.
Service port (Settings/Sensor)
LED	Colour	Activity		Description
UPS	Green	◗	Off	◗	Card startup in progress.
Data		◗	On	◗	Communication with UPS in progress
				◗	Normal operation.
		◗	Flashing		Communication with the UPS is
					operational
RS232	Orange	◗	Off	◗	Configuration menu is active
		◗	On	◗	Normal		operation.		Configuration
					menu is deactived
		◗	Flashing	◗	Communication with the Environment
					Sensor (option).

3.3Installation in the UPS

The Network Management Card (66123) can be "hot" installed in the MGE Galaxy 7000 UPS or SSC unit.

Note the card's MAC address prior to insertion

Connect the ETHERNET cable

Insert and tighten the card's retaining screws

Wait 3 min.; the card is completely operational when the green UPS Data LED flashes continuously

3.4Sensor installation (option)

The Environment sensor is available as an option on the Network Management Card. SKU number is 66846.

The sensor allows remote monitoring of the UPS's environment through regular measurements: temperature, humidity, status of two external contacts. It also enables notification of alarms (e-mail, trap SNMP) according to pre-programmed thresholds.

It is connected to the Service port (Settings/Sensor) directly on the Network Management Card with a standard Ethernet cable (20 meters maximum).

Recognition is automatic. Supervision and configuration are performed via a menu that can be accessed directly from the home page.

Network Management Card & Modbus/Jbus	34022321XT indice :AE	Page 14/98
Network Management Teleservice Card

APC by Schneider Electric

www.apc.com