Ethernet port
LED | Colour | Activity | Description |
|
|
|
| |||
|
|
|
|
|
| |||||
ACT | Green | ◗ | Off | ◗ | Card not connected to the network. | |||||
|
| ◗ | On | ◗ | Card | connected to | the | network | but | |
|
|
| without activity |
|
|
| ||||
|
|
|
|
|
|
|
| |||
|
| ◗ | Flashing | ◗ | Port | is | active | in | receiving | / |
|
|
| transmission |
|
|
| ||||
|
|
|
|
|
|
|
| |||
100M | Orange | ◗ | Off | ◗ | Port operating at 10Mbits/s. |
| ||||
|
| ◗ | On | ◗ | Port operating at 100Mbits/s. |
| ||||
Service port (Settings/Sensor) |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |||
LED | Colour | Activity | Description |
|
|
|
| |||
UPS | Green | ◗ | Off | ◗ | Card startup in progress. |
| ||||
Data |
| ◗ | On | ◗ | Communication with UPS in progress | |||||
|
|
|
| ◗ | Normal operation. |
|
|
| ||
|
| ◗ | Flashing |
| Communication with the UPS is |
| ||||
|
|
|
|
| operational |
|
|
| ||
RS232 | Orange | ◗ | Off | ◗ | Configuration menu is active |
| ||||
|
| ◗ | On | ◗ | Normal | operation. | Configuration | |||
|
|
|
|
| menu is deactived |
|
|
| ||
|
| ◗ | Flashing | ◗ | Communication with the Environment | |||||
|
|
|
|
| Sensor (option). |
|
|
| ||
Phone port |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |||
LED | Colour | Activity | Description |
|
|
|
| |||
UPS | Green | ◗ | Off | ◗ | Card not connected to phone network | |||||
Data |
| ◗ | On | ◗ | Card | connected to | phone network, | |||
|
| but no activity |
|
|
| |||||
|
|
|
|
|
|
|
| |||
|
| ◗ | Flashing | ◗ | Port is sending/receiving |
| ||||
CD | Orange | ◗ | Off | ◗ | Modem is not connected |
| ||||
|
| ◗ | On | ◗ | Modem is connected |
|
| |||
|
| ◗ | Flashing | ◗ | Modem is connecting |
|
| |||
4.3Installation in the UPS
The Network Management Teleservice Card (66124) can be "hot" installed in the MGE Galaxy 7000 UPS or SSC unit. Note the card's MAC address prior to insertion
Connect the ETHERNET cable
Insert and tighten the card's retaining screws
Wait 3 min.; the card is completely operational when the green UPS Data LED flashes continuously
For Teleservice installation, the NMTC card must be installed in the SSC unit.
4.4Sensor installation (option)
The Environment sensor is available as an option on the Network Management Card. SKU number is 66846.
The sensor allows remote monitoring of the UPS's environment through regular measurements: temperature, humidity, status of two external contacts. It also enables notification of alarms
It is connected to the Service port (Settings/Sensor) directly on the Network Management Card with a standard Ethernet cable (20 meters maximum).
Recognition is automatic. Supervision and configuration are performed via a menu that can be accessed directly from the home page.
Network Management Card & Modbus/Jbus | 34022321XT indice :AE | Page 16/98 |
Network Management Teleservice Card |
|
|
APC by Schneider Electric
www.apc.com
