November 2006

Connecting peripheral devices to the 201i server

To connect the CD-ROM and tape drives to the 201i server (Option 11C Mini)

1Connect the first SCSI device.

2Follow instructions below.

IF the first

 

device is the

THEN

 

 

CD-ROM drive

do the following:

 

a. Attach the A0769312 SCSI adapter to the CD-ROM

 

drive.

 

b. Connect the NTRH3502 SCSI cable that you

 

installed earlier on the Option 11C Mini to the SCSI

 

adapter on the CD-ROM drive.

 

 

tape drive

connect the NTRH3502 SCSI cable that you installed

 

earlier on the Option 11C Mini to the tape drive.

3Connect the low-profile right-angle SCSI cable connector to the SCSI connector on the 201i server faceplate

4Connect an additional device in a daisy chain, if required, using either the SCSI cable supplied with the device or an NTRH3502 cable.

The following diagram shows cable connections, where the CD-ROM drive is the first device:

201i Server Hardware Installation

149

Page 149
Image 149
Nortel Networks manual 201i Server Hardware Installation 149