Preparing peripheral devicesStandard 1.07
IF you are connecting | THEN |
|
|
a tape drive only | do nothing. |
| External termination is not required |
| because the drive is already internally |
| terminated. This is indicated by a label on |
| the back or front of the tape drive. |
|
|
both a | set DIP switch 2 on the back of the |
tape drive (the tape drive is | |
the last device) | The tape drive is internally terminated. |
| |
| External termination is not required. |
|
|
What’s next?
Complete the 201i server installation in the switch. See Chapter 8, “Connecting peripheral devices to the 201i server.”
134 | CallPilot |
