Nortel Networks 201i manual CallPilot Clan and Elan network setup

November 2006 About the 201i server

In the illustration on page 26, the telephony LAN (TLAN) provides IP connectivity between the Succession 1000 system and the i2004 Internet phonesets. The connection between the Call Server and Media Gateway can be point-to-point, or it can be through the LAN, if the system is installed in a distributed data network.

For information about the Succession 1000 system and i2004 Internet phoneset bandwidth and network requirements, refer to the Succession 1000 Planning and Installation Guide (NTP 553-3023-210).

For a description of each Succession 1000 system component, see “Succession 1000 description” on page 96.

CallPilot CLAN and ELAN network setup

The 201i server supports the following network protocols:

„CLAN: 10/100Base-T Ethernet

A built-in Ethernet controller on the 201i server motherboard provides Ethernet CLAN capability. The CLAN provides data connectivity between desktop and web messaging clients, administrative PCs, and the CallPilot server.

„ELAN: 10Base-T Ethernet

A built-in Ethernet controller on the 201i server motherboard provides Ethernet ELAN capability. The ELAN carries call processing traffic between the CallPilot server and the Meridian 1 switch or Succession 1000 system.

Note: For more information about the ELAN, see “About the ELAN” in the CallPilot Installation and Configuration Task List.

You use the 201i server multi I/O cable to establish the CLAN and ELAN connections. For more information, see page 28.

201i Server Hardware Installation 27