Connecting peripheral devices to the 201i serverStandard 1.07

IF the first device is the

THEN

 

 

tape drive

do the following:

 

a. Attach the A0769312 SCSI adapter to the

 

tape drive.

 

b. Connect the SCSI adapter to the

 

NTRH1410 cable that you connected earlier

 

to the Meridian 1 I/O panel.

3Connect the low-profile right-angle SCSI cable connector to the SCSI connector on the 201i server faceplate.

4Connect an additional device in a daisy chain, if required, using either the SCSI cable supplied with the device or an NTRH3502 cable.

The following diagram shows cable connections, where the CD-ROM is the first device:

201i cabling

 

 

Peripheral cabling

 

 

 

 

 

 

 

 

 

 

Meridian 1

 

 

 

Optional

 

 

 

 

 

 

 

 

 

 

201i

 

 

 

 

 

NTRH9038

 

 

NTRH30AA

 

 

 

 

 

Tape drive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NTRH1408

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear

 

 

SCSI device cable

 

I/O panel

 

 

NTRH3502

NTRH9105

CD-ROM drive

NTRH1410

G101430

Note: Alternate SCSI device connection scenarios are supported, but are not depicted in this guide. If you want to use a connection scenario

146

CallPilot

Page 146
Image 146
Nortel Networks 201i manual NTRH30AA