About the 201i server | Standard 1.07 |
The following table describes each faceplate feature:
Faceplate feature | Description | |
|
| |
Mouse connector | The mouse connector is a standard PS/2 connector and | |
| is | |
|
| |
Lock latches | Lock latches at the top and bottom of the faceplate | |
| secure the server to the backplane of the Meridian 1 | |
| switch or the backplane of the Succession 1000 Media | |
| Gateway or Media Gateway Expansion. | |
|
| |
Keyboard connector | The keyboard connector is a standard PS/2 connector | |
| and is | |
|
| |
Infrared port | For future use. | |
|
| |
Monitor connector | The monitor connector is a standard, | |
| ||
|
| |
Power status LED | The LED indicates two server states: | |
| | the completion of |
| | when it is safe to remove the server from the |
|
| Meridian 1 switch or Succession 1000 Media |
|
| Gateway or Media Gateway Expansion |
|
| |
MPC card status | There is an LED for each MPC card slot. The following | |
LEDs | list describes each LED status: | |
| Off: The MPC card is not receiving power. It is safe | |
|
| to remove the card. |
On: The MPC card is in use. It is not safe to remove the card.
Off, then on: The MPC card has been recognized by the 201i server software and has been powered up.
20 | CallPilot |
