Nortel Networks 201i manual Inner Scsi bracket

November 2006 Installing the 201i server in an Option 11C or Option 11C Mini

See the following diagram:

Inner SCSI bracket

Note: After you remove the bracket, refasten the screws in their original locations inside the cabinet.

G101587

3Refasten the inner SCSI bracket screws in their original locations inside the cabinet.

You will use the top screw later to fasten the NTRH3502 SCSI cable drain wire.

4Connect the low-profile right-angle SCSI connector on the NTRH3502 cable to the SCSI connector on the 201i server faceplate.

5Fasten the SCSI cable drain wire to the top screw that previously held the inner SCSI bracket in place.

201i Server Hardware Installation 89