![](/images/new-backgrounds/1205319/20531971x1.webp)
Preparing for installation | Standard 1.07 |
Installation overview
Introduction
This section provides a
For a list of CallPilot documentation, see the document map on page 7.
Before you begin
Ensure that proper power and grounding are available for all the power outlets serving the CallPilot server and its associated peripherals. Power for these devices must be wired and fused independently of all other receptacles and referenced to the same ground as the PBX system.
A qualified electrician must implement the
Provide a sufficient number of properly grounded power outlets or power bars for all equipment.
For more information, refer to Chapter 2, “Grounding and power requirements”, in the CallPilot Planning and Engineering Guide.
36 | CallPilot |