Preparing for installation | Standard 1.07 |
Switch and network requirements
Introduction
The information in this section will help you plan your 201i server installation.
Meridian 1 or Succession 1000 slot requirements
The 201i server occupies two physical and electrical slots.
You must install the 201i server in two peripheral equipment slots as follows:
Switch | Slots |
|
|
Meridian 1 tiered | 0 through 14 |
systems | Ensure that both slots have electrical backplane |
| |
| connectivity. |
|
|
Option 11C | 1 through 9 in any Option 11C cabinet |
| Note: Both of the server backplane connectors must |
| be installed in slots 1 through 9 to receive proper |
| power. Neither connector can reside in slot 10. |
|
|
Option 11C Mini | A pair of consecutive slots in any cabinet |
| Note: You cannot install the 201i server in slots 0 or |
| 4 because these slots are dedicated to other cards. For |
| more information about cards and slots, refer to the |
| Option 11C Mini documentation. |
44 | CallPilot |
