![](/images/new-backgrounds/1205319/20531961x1.webp)
November 2006 | About the 201i server |
Peripheral connectivity
Introduction
Peripheral equipment is attached to the 201i server on the server faceplate.
Faceplate connections
ATTENTION |
| |
Connections made to the faceplate (with the exceptions | ||
| ||
| noted below) are temporary only, because you must | |
| remove the cabinet cover to make these connections. | |
| The system does not meet specifications for radiated | |
| EMI if you remove the cabinet cover. |
The following peripheral devices connect to the 201i server faceplate:
monitor (SVGA)
keyboard
mouse
MPC card (permanent connection)
SCSI cable (permanent connection)
Monitor, keyboard, and mouse
You must connect a monitor, keyboard, and mouse to run the Configuration Wizard or to install the operating system on the 201i server as part of a recovery process.
All three peripheral components are
201i Server Hardware Installation | 31 |