Nortel Networks 201i manual Installing the NTRH3502 Scsi cable for Succession

Installing the 201i server in the Succession 1000 system Standard 1.07

Installing the NTRH3502 SCSI cable for Succession 1000

Introduction

Before you can connect a CD-ROM or tape drive to the 201i server, you must install the NTRH3502 SCSI cable. The NTRH3502 SCSI cable has a low profile right-angle connector that allows the cable to be connected to the 201i server faceplate when the Media Gateway or Media Gateway Expansion cover is installed. This allows the external SCSI device to remain permanently connected to the 201i server.

CD-ROM and tape drive cabling diagram

The following diagram shows how the intermediate SCSI cable, CD-ROM drive, and tape drive are connected to the 201i server. The CD-ROM drive is the first device. The tape drive is the last device:

201i cabling			Peripheral cabling
	Succession 1000			Optional
	Media Gateway or
					NTRH9038
	Media Gateway
	Expansion				Tape drive
	201i
	NTRH30AA
			Tape drive SCSI cable
			NTRH3502
						NTRH9105
						CD-ROM
						drive
CD-ROM drive SCSI		SCSI adapter
cable NTRH3502		A0769312
							G101615

110 CallPilot