Nortel Networks 201i manual To install the Scsi cables for Meridian

Installing the 201i server in a large Meridian 1 system Standard 1.07

To install the SCSI cables for Meridian 1

1Thread the SCSI connector end of the NTRH1408 cable from the front of the Meridian 1 along the bottom of the shelf to either the left or the right access channel.

2Leave the low-profile right-angle SCSI connector hanging for now. You will connect it later to the 201i server faceplate.

Note: The following diagram shows what the connection looks like after the cable is connected:

201i server

Intermediate

SCSI cable

NTRH1408

Access channels

to rear of cabinet

G101556

3Thread the cable through the access channel to the back of the Meridian 1.

4Attach the NTRH1408 cable to the inside of the I/O panel slot associated with the 201i server right slot.

5Connect the NTRH1410 cable to the NTRH1408 cable connector on the I/O panel.

68 CallPilot