Installing the 201i server in the Succession 1000 system | Standard 1.07 | ||
|
|
|
|
|
|
|
|
Inner SCSI bracket
Note: After you remove the bracket, refasten the screws in their original locations inside the cabinet.
G101587
2Refasten the inner SCSI bracket screws in their original locations inside the Media Gateway or Media Gateway Expansion.
You will use one of the screws later to fasten the NTRH3502 SCSI cable drain wire.
3Connect the low profile
4Fasten the SCSI cable drain wire to one of the screws that previously held the inner SCSI bracket in place.
Notes:
Use the screw that is the most convenient.
Press firmly on the drain wire
112 | CallPilot |
