Nortel Networks 201i manual Installing the MPCs, To install the MPCs, Correct card insertion

Connecting peripheral devices to the 201i server Standard 1.07

Installing the MPCs

Introduction

Two MPCs are preinstalled at the factory. This section describes how to install additional cards, if required.

Correct card insertion

The MPC-8 card is keyed so that it fits only one way into the slot on the 201i server faceplate. If the card is inserted incorrectly, the card does not go all the way into the slot.

CAUTION

Risk of equipment damage

If you force the card into the slot incorrectly, you can damage the MPC-8 card and 201i server.

To install the MPCs

1Do one of the following:

IF	THEN
MPCs are already	ensure that they are firmly seated in
installed	their slots.
you want to install	continue with the rest of this procedure.
additional MPCs

2Ensure that the MPC-8 card label is facing one of the following ways:

„facing up if the 201i server is lying horizontally on a flat surface, with the top lock latch on the left

140 CallPilot