![](/images/new-backgrounds/1205319/20531943x1.webp)
About the 201i serverStandard 1.07
Faceplate feature | Description |
|
|
Network and drive | The E and C LEDs indicate the presence of network |
activity LEDs | activity for both the ELAN and CLAN interfaces |
(labeled as E, C, I, and S) (respectively). When they are lit, they indicate that the
| interfaces are properly attached to their respective |
| hubs. When the LEDs are blinking, there is network |
| activity. |
| When the I and S LEDs are lit, it means that the IDE |
| hard drive and SCSI device are being accessed. |
|
|
Reset button | The reset hardware was designed for Windows NT and |
| does not function properly in Windows 2003. Do not |
| use this button. |
|
|
Environmental specifications
Temperatures
Recommended | 15°C (59°F) to 30°C (86°F) |
temperature |
|
Absolute temperature | 10°C (50°F) to 45°C (113°F) |
temperature |
|
temperature | (less than 72 hours) |
Change rate temperature | Less than 1°C (34°F) per 3 minutes |
|
|
Relative humidity |
|
|
|
Recommended relative | 20% to 55% RH (noncondensing) |
humidity (RH) |
|
22 | CallPilot |