![](/images/new-backgrounds/1205319/205319123x1.webp)
Installing the 201i server in a large Meridian 1 system | Standard 1.07 |
Installing the NTRH3501 backplane cable
Introduction
You must connect the backplane (tip and ring) cable supplied with the 201i server (NTRH3501) for
When installed, this cable completes the connection between the left slot, the I/O panel on the rear of the switch, and the multi I/O cable on the 201i server.
Backplane (tip and ring) cable
The following diagram shows the NTRH3501 backplane (tip and ring) cable:
Backplane (tip and ring) cable NTRH3501 |
UP 1 |
UP 2 |
UP 3 |
G101546 |
62 | CallPilot |