Nortel Networks 201i manual Succession 1000 description, Call Server

Installing the 201i server in the Succession 1000 system Standard 1.07

Succession 1000 description

Introduction

The Succession 1000 system is an IP PBX that provides telephony and data capabilities over an IP network. The Succession 1000 system consists of the following major components:

„Call Server

„Media Gateway

„Media Gateway Expansion

Call Server

The Call Server provides telephony services and call processing.

It supports up to four Media Gateways and four Media Gateway Expansions when the Small System Controller (SSC) card inside the unit is fully populated with two dual-port 100BaseT daughterboards.

The following connectors are located on the back of the Call Server:

„four 100Base-T connectors for connecting Media Gateways using one of the following:

„for connections over the LAN customer-supplied standard 100Base-T CAT5 Ethernet cables

„for point-to-point connections (Nortel-supplied crossover Ethernet cables)

„one 10Base-T Ethernet connector that

„provides the ELAN interface to management software applications, such as Optivity Telephony Manager and CallPilot

„accepts an industry-standard Medium Access Unit (MAU)

„one SDI connector that interfaces with three TTY ports using a three-port SDI cable

96 CallPilot