November 2006 | Installing the 201i server in an Option 11C or Option 11C Mini |
To install the cable
CAUTION
Risk of equipment damage
You must power off the 201i server before connecting or disconnecting SCSI cables.
1Attach the bracket assembly and cable as follows:
a.Below the card cage, temporarily remove the hardware that secures cable connections to the Option 11C.
b.Temporarily remove any cabling that may interfere with the installation of the intermediate SCSI cable bracket assembly.
ATTENTION |
| |
Before you disconnect the cabling, take the | ||
| ||
| telephony equipment services associated with the | |
| cabling out of service. |
c.Remove the two screws on the right side of the Option 11C I/O panel.
d.Attach the intermediate SCSI cable bracket assembly, using the screws that were removed previously, so that the SCSI connector appears on the right side of the Option 11C cabinet.
201i Server Hardware Installation | 81 |
