![](/images/new-backgrounds/1299610/299610107x1.webp)
Chapter 5: Configuring System Parameters | April 14, 2006 |
SAVING CHANGES
Use the Save Changes page for saving your current configuration to flash memory. This option immediately writes all current system configuration to permanent memory (NVRAM). You cannot selectively write configuration to NVRAM. When you issue the save command, all current configuration is written to NVRAM.
| Note: When saving the modem configuration, do not power off the modem while the save is in process. |
|
|
Step | Action |
1 Select Save Changes on the menu bar to access the Save Changes page (Figure |