INSTALLING THE CROSSOVER
Step 1: Find a location for the crossover away from any factory or after market electrical wires. It is recommended to mount the passive crossover close to the amplifier. In the event you decide to upgrade and
Step 2: Remove top cover of crossover housing. Don’t lose it.
Step 3: Mark with a marking pen the two mounting holes.
Step 4: Remove crossover and
WARNING: Check for clearance of window mechanisms and electrical wires BEFORE you drill.
Step 5: Mount the crossover using the supplied #8 screws.
Step 6: Connect the wires. Make sure the speaker wires for the mid/woofer go to the
woofer | output | and | the | tweeter | to | the | tweeter | output. |
Be sure | to | observe | the | correct | polarity. | Changing the | ||
polarity of the tweeter may be necessary | for | optimum sound | quality. | |||||
Step 7:
© 2007 directed | 7 |
