Troubleshooting

187

Some held jobs were not restored

From the printer control panel, select Continue to clear the message and continue printing.

Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.

Standard network software error [54]

Try one or more of the following:

From the printer control panel, press to confirm.

Unplug the router, then wait for 30 seconds, and then plug it back again.

Turn off the printer, and then turn it back on.

Update the network firmware in the printer or print server. For more information, contact your system support person.

Standard USB port disabled [56]

Try one or more of the following:

From the printer control panel, press to clear the message and continue printing.

Note: The printer discards any data received through the USB port.

From the printer control panel, set USB Buffer to Auto.

Supply needed to complete job

A supply needed to complete the job is missing. Cancel the current job.

Too many bins attached [58]

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the extra bins.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

Too many disks installed [58]

1Turn off the printer.

2Unplug the power cord from the electrical outlet.

3Remove the extra printer hard disks.

4Connect the power cord to a properly grounded electrical outlet.

5Turn the printer back on.

Page 187
Image 187
Dell B5460DN manual Some held jobs were not restored, Standard network software error, Standard USB port disabled