Replace missing fuser [31.xy]
Install the missing fuser. For more information, see the instruction sheet that came with the part.
Replace missing imaging unit [31.xy]
Install the missing imaging unit to clear the message. For more information, see the “Replacing supplies” section of the
User’s Guide.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply o r see the “Replacing supplies” section of the User’s
Guide.
Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section of the User’s Guide or
visit our Web site.
Replace unsupported fuser [32.xy]
Remove the fuser, and then install a supported one. For more i nformation, see the instruction sheet that came with
the part.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to c lear the message and continue printing. For more
information, see the instruction sheet that came with the supply o r see the “Replacing supplies” section of the User’s
Guide.
Note: If you do not have a replacement imaging unit, then see the “Orderin g supplies” section of the User’s Guide or
visit our Web site.
Restore held jobs?
Do either of the following:
•Select Restore on the printer control panel to restore all held jobs st ored in the printer hard disk.
•Select Do not restore if you do not want any print jobs to be restored.
Serial port [x] disabled [56]
Try one or more of the following:
•From the printer control panel, select Continue to clear the message.
The printer discards any data received through the specified se rial port.
•Select Reset active bin to reset the active bin for a linked set of bins.
•Make sure the Serial Buffer menu is set to Enabled.
Troubleshooting 186