Dell B5460DN manual Troubleshooting 212, Action Yes

Troubleshooting		212
Action	Yes	No
Step 2	Go to step 3.	Change the paper type,
From the printer control panel, set the paper type, texture, and weight in		texture, and weight to
the Paper menu to match the paper loaded in the tray.		match the paper
		loaded in the tray.
Is the tray set to the type, texture, and weight of the paper loaded?
Step 3	Go to step 4.	The problem is solved.

aDepending on your operating system, specify the paper type, texture, and weight from Printing Preferences or from the Print dialog.

bResend the print job.

Is the print still too light?
Step 4	From the printer	Go to step 5.
Make sure that the paper has no texture or rough finishes.	control panel, change
	the texture settings in
Are you printing on textured or rough paper?	the Paper Texture
	menu to match the
	paper you are printing
	on.
Step 5	Go to step 6.	The problem is solved.

aLoad paper from a fresh package.

Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it.

bResend the print job.

Is the print still too light?

Step 6 Go to step 7. The problem is solved.

aRedistribute the toner in the imaging unit.

1Remove the toner cartridge, and then the imaging unit.

2Firmly shake the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems.

3Install the imaging unit, and then the cartridge.

bResend the print job.

Is the print still too light?
Step 7	Contact technical	The problem is solved.
Replace the imaging unit, and then resend the print job.	support.
Is the print still too light?